Flashing patch binaries using the web

How to patch using Electrosmith’s web tool

You can download existing patch binary file (.bin) from https://github.com/motekulo/prog1/tree/main/patches/pd then flash them to your pedal using the web interface at https://flash.daisy.audio/.

If the Daisy Seed in your pedal has not yet been flashed with an effect, then you need to load a bootloader first.

Important - when flashing, power your pedal from just the USB port - not the main 9v power as well.

  1. Plug the pedal into the computer using a micro usb cable. You don’t need any other power source to the pedal for this part of the process.
  2. Prepare the Daisy for flashing by holding the boot button, then pressing and releasing the reset button (while still holding the boot button). Release the boot button and the Daisy will be ready.
  3. Go the bootloader tab at https://flash.daisy.audio/ and select v6.3.
  4. Press the flash button on the web interface

Once you have a bootloader, you can then prepare your Daisy with another key combination, then flash an effect as follows:

  1. Press the reset button (and release it) then quickly press the boot button (and release it). You should see a flashing “breathing” pattern from the red LED.
  2. Go to the “File upload” tab of https://flash.daisy.audio/, select the file to upload (a .bin file) and press the Flash button on the web interface.
  3. Once flashed, unplug the Daisy, plug your pedal back in to your pedalboard or guitar, and start playing.